There are many reasons why you might want to use a hand held remote as your garage door opener; it is obviously more convenient, which is one of the main reasons why you would want to use it You don’t even need to leave your car to open or close the garage door if you have a remote, which can be an attractive quality for many people. Most people choose to use remotes, rather than pulling the garage door open and closing it, as it can be hassle you really don’t need. A remote can also give you extra peace of mind that your garage is secure and it can also be safer. It can be easy to forget to close the garage door when you do it manually or you might leave it ajar without noticing. An easy route for burglars. However, there is much less chance of this happening when you use a remote control to secure your door in place. The residential garage door remote consists of small code switches which are also on the opener which controls the door. There is a signal which is sent from the remote to the opener, which then works to open or close the door. These are some tips on how to add a hand held remote to your garage door.

Check Compatibility

You will need to make sure that the hand held remote is compatible with the garage door, otherwise it will not be of much use Your garage door installation company will be able to advise on the best operator to use, based on the type of door you currently have in place.

Tested and Certified

It is important that you check whether your remote has been tested and certified, as if not, the remote could be dangerous. It is a good idea to check with your garage door maintenance company, as they will be able to advise on which types are safe to use, as well as helping with any garage door spring repair you might need. They can also carry out a garage door inspection to see that everything is in order.

Also Read: Tips To Protect Garage Doors Against Harsh Winter Conditions

Program the Remote

When you have the right, compatible remote, it is time to program it, and this means ensuring any others are cleared from the opener. You will find that there is a learn button which is visible on the opener and you will need to locate this to program your remote. You should press the learn button for a while and in doing so, the indicator light should start to blink. When this happens, you can try the button on your remote to see if everything is working.

Test the Remote

You will only be able to have five remotes for the garage door opener. If you lose a remote, it may be the case that the codes will need to be completely erased. The learn button is usually the way to do this If you test the remote and it doesn’t seem to be working, you may need to check with a garage door repair company who can carry out a garage door opener repair.